|Bakflip MX4||Bakflip G2||BakFlip F1||BAKFLIP FIBERMAX|
|Weight rating||400 LBS||300 LBS||400 LBS||300 LBS|
|Finish||Matte Black||Powder Coated Aluminium||Gloss Black||Gloss Black|
|Material||Aluminium||Aluminium||Fiberglass Reinforced Polymer||Fiberglass Reinforced Polymer|
|Warranty||3 Years||2 Years||3 Years||2 Years|
|Close Tailgate With Cover Down||Yes||No||No||No|
The Bakflip MX4 is one of the best selling tonneau covers from Bakflip and is made with aluminium with a matte finish and can support weight of up to 400 LBS on top of the cover. It was the first tonneau cover from the bakflip range that allowed you to close the tailgate with the cover in the open or closed position. The cover overall is pretty watertight but water may tend to leak a little from the edges of the cover as well as the edges of the tailgate during heavy rains or while going through a car wash. However, the use of some weather stripping should help prevent this. This cover sits flat with the bed rails and if you have a bed extender, the cover rails don’t get in the way of the extender when you are swinging at around. When folded up all the way though, the MX4 will block your rear view. Compared to the extang solid fold, it is thinner and lighter but is also more watertight with less leakage.
The Bakflip G2 is cheaper than the MX4 and is rated at 300 lbs, comes with a 2 year warranty and unlike the MX4 it does not have a matte finish but a powder coated finish instead. With the G2 you will have to open the last panel in order to close the tailgate, although this issue may have been fixed in the newer models. Also with this cover, you may have an issue with the seals not lying flat on the bed rails in which case you can use a hairdryer as the heat will make them lie flat.
The Bakflip F1 cover is more dent resistant than the MX4 and G2 and although it will get dented in severe hailstorms, it will still hold up better than the MX4 or G2. Like the MX4, the F1 too is rated at 400 LBS but is made from Fiberglass and not aluminium. Some people who have bought this cover though do complain that there are issues with fading, but you can get it replaced under the warranty period if it does fade. If you are going for the F1 make sure you ask for the newer version as that has the better closing mechanism of the MX4 and does not require you to open the cover in order to close the tailgate and also make sure that you get the new dual action seals.
Like the G2, the Bakflip FiberMax is also rated at 300 LBS and is made from Fiberglass like the F1 and comes with a warranty period of 2 years. There isn’t much of a difference between this cover and the F1 except for a different hinge design. The panels of the Fibermax are also reportedly 1/2 inch thick while the F1 is reportedly 5/8 inch thick, although we aren’t sure if these are accurate as there is conflicting information on this. Also, the EPS core in the F1 is heavier at 3.5 LBS compared to the 2LBS in the Fibermax